OzHifi - Moon W-7 RS Power Amplifier

MO-W-7 RS

Availability: Low stock

$15,000.00

Qty:

| Add to Compare

Quick Overview

The MOON W-7 Power Amplifier is a dual-mono balanced differential design, representing the next generation of MOON high-performance audio components. Producing 150 watts per channel of uncolored high-current output power into 8Ω (300 wpc into 4Ω and 500wpc into 2Ω), the W-7 will drive virtually any loudspeaker to its maximum capabilities with incredible ease. This achievement is due, in part, to our new proprietary "Lynx" amplification circuit. Further raising the bar, the MOON W-7 can be fully integrated into a custom-install environment via an RS-232 port and 12V trigger. As well, a plethora of user selectable cosmetic options are available at the time of purchase.

More Views

· Full unsolicited RS-232 bidirectional feedback
· Lynx circuitry which is a "no overall feedback" design resulting in genuine real-time amplification,
a more accurate musical reproduction with respect to tonality, virtually non-existent IMD and the
elimination of common phase errors resulting from feedback
· Custom proprietary toroidal transformer design with lower magnetic, electrical and thermal
loss, yielding an improved power transfer and lower regulation factor. The result is increased
current speed and better dynamics
· An oversized power supply
· 12 Volt trigger input/output for remote operation
· "Class A" output to 5 watts for greater efficiency
· Precision matched and fully decoupled Bipolar output devices which offer superb linearity
throughout the entire audio frequency spectrum
· A high damping factor yielding superior musical dynamics, improved signal speed and refined
refined timbre accuracy
· A very short capacitor-free signal path for a faster transient response
· 4-Layer PCB’s with pure copper tracings for a much shorter signal path; This results in
greater sonic accuracy and a dramatically improved signal-to-noise ratio
· Stable to any known speaker impedance
· Ultra rigid chassis construction to minimize the effects of external vibrations
· Accurate matching of the very finest quality electronic components in a symmetrical circuit design
· Designed to be powered up at all times for optimal performance.

MOON W-7 RS Power Amplifier Specifications

Type: Solid State
Configuration: Dual-Mono / Fully Balanced
Power Supply Transformer: 2 x 0.5kVA
Power Supply Capacitance: 115,520µF
Class of operation: A/AB
Balanced Input: XLR - 1
Single Ended Input: RCA - 1
Input Device Type: J-FETs
Input Sensitivity: 980mV RMS
Input Impedance: 47.5 KΩ
Output Device Type: Bipolars - 12 per channel
Output Binding Posts: WBT - 1 pair per channel
Output Power @ 8 Ω: 150 Watts
Output Power @ 4 Ω: 300 Watts
Output Power @ 2 Ω: 600 Watts
Output Power - Bridged Mono: 600 Watts
Frequency Response: 10Hz - 200kHz (+0/-3dB)
Output Impedance: < 0.01
Damping Factor (Static): > 800
Gain: 31dB
Signal-to-noise Ratio: 106dB @ full power
Maximum Output Voltage: 34 Volts
Slew Rate: 42 V/µs
Maximum Current - Peak: 42 amperes
Maximum Current - Continous: 18 amperes
Crosstalk @ 1kHz: -105dB
IMD: Unmeasureable
THD (20Hz - 20kHz @ 1 watt): 0.015 %
THD (20Hz - 20kHz @ 150 watts): 0.04 %

12 Volt Trigger Output Operation: Direct Logic (0V = off, 12V=on) using a 1/8" mini-jack with an input impedance of 1K Ω and current requirement of 12mA
RS-232 Port: 9-pin female DB connector

Power Consumption @ idle: 40 Watts
AC Power Requirements: 240V / 50Hz
Fuse Replacement - 230V: 4A long fast blow
Shipping weight: 39 kgs
Dimensions (W x H x D): 477.5 x 188 x 444.5 mm

	Moon P-7 & W-7 Customer Literature 1.1 MB
	Moon W-7 Manual 199.4 KB