Fathom In Wall Solution System 2
The same minds that engineered JL Audio’s reference-grade Fathom® and Gotham® powered subwoofers have created an amazing in-wall subwoofer solution, centered on a purpose-engineered, thin-line driver with patented technology.
Housing this exotic driver, is a critically engineered enclosure with a unique floating mount design to minimize wall excitation. The enclosure features extensive architectural features aimed at improving rigidity while keeping a very low profile and minimal wall thickness.
A paintable fine steel-mesh grille, also designed to control vibration, is included for each enclosure in a system.
Each IWS system is driven by a rack-mountable, purpose-tuned amplifier, capable of delivering up to 2 kW of clean power, and armed with serious processing features, including our acclaimed Automatic Room Optimization system.
There is no need to lower your expectations when selecting this remarkable in-wall solution... it’s a real Fathom®.
JL Audio Fathom In Wall Solution System 2
Unbalanced Inputs: Stereo or Mono (two RCA jacks)
Balanced Inputs: Stereo or Mono (two female XLR jacks)
Output To Slave: Balanced (one male XLR jack)
Input Modes: Master or Slave
Level Modes: Reference (fixed gain) or Variable from full mute to +15dB over reference gain
Power Modes: Off, On or Automatic Signal-Sensing
Light Modes: Off, On or Dim
Low Pass Filter Mode: Off, 12 dB per octave or 24 dB per octave
Low Pass Filter Cutoff Frequency: Variable from 30 Hz - 130 Hz
Polarity: 0 or 180 degrees
Phase: Variable from 0 - 280 degrees
ELF Trim: Variable from -12 dB to +3 dB at 25 Hz
NOTES: Automatic Room Optimization (A.R.O.): with included, laboratory-grade calibration microphone, defeatable
Enclosure Type: Two Sealed Enclosures
Driver: 13.5-inch (nominal diameter) in each of two enclosures
Frequency Response (Anechoic): 26 Hz - 101 Hz (+/- 1.5 dB)
-3dB at 25 Hz / 112 Hz
-10dB at 22 Hz / 150 Hz
Effective Piston Area:196.51 sq. in./ 0.1268 sq. m.
Effective Displacement: 294.6 cu. in. / 4.82 liters
Amplifier Power: 2000 watts RMS short-term
Dimensions*:
2x4 Enclosure: 1,778 mm x 349 mm x 75 mm
(H) Height x (W) Width x (D) Depth
2x6 Enclosure: 1,397 mm x 349 mm x 119 mm
(H) Height x (W) Width x (D) Depth
Amplifier: 89 mm x 442 mm x 455 mm
(H) Height x (W) Width x (D) Depth
Grille: 438 mm x 508 mm
(H) Height x (W) Width x (D) Depth
Wall Opening: 368 mm x 438 mm
(H) Height x (W) Width x (D) Depth
Net Weight: Amplifier: 19.5kg
Cabinet Finish: Black Texture-Coated
NOTES: Enclosure Height Dimensions do not include padding material. Amplifier Height Dimensions DO NOT include feet.








